- 
    DetailSmart Bike Light Wireless Remote Control Cycling Turning Signal Taillight NB04 Product name: Remote Control Turning Tail Light 
 Bead Type: LED
 Battery Capacity: 2000 mAh
 Product Color: Black
 Charging time: about 3 hours
 Light: Red Light
 Working time: 12 hours for 100% Lighting
 40 hours for breath lighting
 Prodcut size: 11*5.5*3 cm
 Product weight: About 120g There are 7 different modes << Turn Left / Turn Right >> / Up to down Lighting /Left to right Lighting / Breathing light / 100% Lighting / Flash Lighting  Waterproof Bike Taillight  2000 mAh Large Usb rechargeable Battery Charging time: about 3 hours 
 Working time: about 12 hours for 100% Lighting
 about 40 hours for breath lighting What is the Product Size  Battery indicator  How to install  NB06 Name: Remote Bicycle Tail Light, Bicycle Rearlight 
 Brightness: 85LM
 Battery: 2200mAh
 Light: 7~10 hours
 Material: ABS+Metal
 Whether remote control: YES
 Warning LED: RED and YELLOW flashing IPX4 Waterproof level make this bike turning light can be used in small to moderate rain in the temperature of in -4-140°F -- your best partner for outdoor biking.  Squibomb bike tail light with turn signal has 85LM LED lights, bright enough to be seen from 150ft away in foggy/rainy day or even in dark night.  Remote control the bike tail light to send signals in different modes by the 5 easy to use buttons on the wireless controller. Remote control on handlebar, easy for cyclist to control during riding. Suitable for Mountain, MTB and Road Bicycles.  The bike turn signals use 2200mAh Li-on battery, allow the bike tail light to be fully charge in 3-4 hours and can work for about 7 hours under constant brightness. The remote control use 180mAh Li-on battery, which can keep working for more than 2 months after 1-2 hours fully charge. Both the signal light and remote control can be charged from any USB Port, convenient  Take out the turn signal and the fixed support in the packing box, along the grooves, slide the fixed support in grooves and snap the buckle. Put the loaded turn signal on the bicycle seat tube and tighten it with screws. 
 The remote control is fixed on the bike handle and tighten it up with a screwdriver.   NB02 Name: Bicycle Rearlight, Remote Bicycle Tail Light 
 Brightness: 100LM
 Warning LED: RED flashing
 Size: 85x22mm
 Weight: 30g
 Battery: 500mAh
 Material: ABS+Metal
 High quality remote control LED directional light is used for night use, such as cycling, baby carriage, jogging, walking, road emergency and camping. Main Light Function Control: -Click:Main light is on, entering the long-time lighting mode. 
 Click again to enter the slow flashing mode.
 Click again to enter the fast flashing mode.
 Finally, click it to turn off the main light
 -Left button:Click, the left turn signal light flashes 25 times
 -Right button:Click, the right turn signal light flashes 25 times  USB RECHARGEABLE  Packing list - red or black   NB03 Name: Bicycle Rearlight, Remote Control Bicycle Direction Lamp 
 Brightness: 50LM
 Size: 125x40mm
 Warning LED: RED and BLUE flashing
 Light charging time is 2~3 hours, a full charge can last 4~5 hours
 High quality remote control LED directional light is used for night use, such as cycling, baby carriage, jogging, walking, road emergency and camping. Its directional flashing indicates that night travel safety factor is greatly enhanced. Bicycle light function: 1. Remote Control: A total of 3 buttons 
 1)The left turn key: Press the left turn button ,the button indicator flashes, and the rear left turn indicator flashes, and then press the button to turn off the indicator light.
 2) Right turn key: Press the right turn button, the button indicator flashes, and the rear right turn indicator flashes, and then press the button to turn off the indicator light
 3) LED light key: press the LED button, the button indicator is always on ,and the red light in the tail lamp is always on.Press the LED button again, the button light flashes, and the red light in the rear light blinks. Press the LED button for the third time, and turn off the red light on the tail light
 2. Tail lights: a switch button, red LED warning light, yellow LED indicator light. USB Chargeable  The details      NB01 Name: Bicycle Rearlight, Remote Bicycle Tail Light 
 Brightness: 50LM
 Warning LED: RED flashing
 Size: 88x27x25mm
 Weight: 80g
 Battery: 1200mAh
 Material: ABS+Metal   
- 
    Customer ReviewsNo comments
      Home
      
      /
      Smart Bike Light Wireless Remote Control Cycling Turning Signal Taillight USB Bicycle Rechargeable Rear Light LED Warning Lamp
  
 
           
           
           
           
           
           
           
           
           
          